Hot & Cold Water Cooler | Direct Connect

A direct-connect filtered water cooler delivering hot, cold, and ambient water from a single cabinet — the practical alternative to a bottled-water dispenser for any home or small office that wants chilled and boiling water without the rolling cost of barrel deliveries.

What differentiates this model from the unit above is that the WP product attributes call out the filtration media explicitly: activated carbon plus PP sediment. The carbon stage handles chlorine, taste, and odour from the mains supply; the PP sediment stage captures rust, sand, and particulate before it reaches the carbon, which extends carbon-cartridge life. It's a two-media combination that does the practical work of treating Australian town water for drinking and beverage-making.

Three Taps, One Mains Connection

From a single 1/4" cold-mains feed, the unit dispenses:

• Hot: 5 L/hr output at ≥ 90 °C
• Cold: 2–3 L/hr output at ≤ 10 °C
• Ambient: room-temperature, filtered

A child-safe lock on the hot tap prevents accidental dispense — necessary in any household with kids and standard practice in commercial deployments.

Power Draw

550 W heating and 90 W cooling, on 220 V at 50 Hz mains. Designed to operate continuously between 10 °C and 32 °C ambient — fine for an unconditioned laundry or garage in temperate climates, fine year-round indoors.

Weight and Footprint

The attribute sheet lists 16 kg for this configuration. Confirm a sturdy bench or floor location at install — this is not a unit you want to move regularly. Direct mains plumbing should be done by a licensed plumber for warranty cover; the unit itself is point-of-use and downstream-of-meter, outside WaterMark certification scope.